Skip to main content


MW100-35 Low profile (4.5" above roof peak) 10 foot vent with open top for additional air flow (36 square inches per lineal foot). 3 1/2" throat with a 2" flange and 13" overall width.


The 3 1/2" throat ventilator is designed for large attic ventilation or entire building ventilation such as in horse, cattle, or poultry buildings. This vent provides 36 square inches of free area per lineal foot for ventilation.



  • Strength

    Standard 29 gauge galvanized painted steel for strong, long life{All PLYCO ridge vents are G-90 Galvanized

  • Colors

    Standards colors are: White and cocoa brown with all manufacturers colors available. (Kynar when available)

  • Standards

    The MW100-35 comes standard with a 2" nailing flange which equals a 13" overall coverage to fit more building applications

  • Edges

    Hemmed edges are standard for easier, safer handling and to guard against rust.
    Each vent is individually cartoned for less damage.

  • Flashing

    Flashings are packaged with each vent for single or continuous installations which saves forgotten parts or extra cost.