Plyco Sells Wholesale OnlyPlyco products are available through approved builders, dealers and distributors. Call us for a qualified dealer in your area.
Plyco manufactures and distributes a variety of ventilation products designed to provide air-flow to meet your requirements. Listed below are various building components and products from decorative cupolas to ridge vents with anywhere from 12 square inches to as much as 108 square inches of free air space per lineal foot. We also offer wall vents and louvers. Most of Plyco’s ventilation products are available in a wide variety of colors to match the color of your building.
For the highest quality ventilation products on the market, shop Plyco louvers, cupolas, ridge vents and wall vents using the menu on the left. Our quality building components work in conjunction with Ply-foil Reflective Insulation to allow you complete control of your building's climate.
This is a low profile unit, 10 feet in length with 12 square inches of free air space per lineal foot. It has a totally covered top and blends well with the roof line.
This vent has a higher profile than the MWE and is open at the top. The ventilator has an internal diverter to direct rain off to the side and out onto the roof. The free air space per lineal foot is 30 square inches and it is 10 feet long.
This has the same design as the 25 series with increased free air space of 36 square inches per lineal foot. The ventilator rises 4 inches above the ridge and comes 10 feet in length.
This unit is of the same design as the 35 series but the diverter is made from translucent fiberglass. Having the translucent fiberglass diverter allows light into the building ridge while keeping the rain out.
These are our large capacity ventilators designed for the confinement building. They have 108 square inches of free air space per lineal foot. The units are available in 4 and 10-foot lengths. The 4-foot unit can also be closed if ordered with an optional spring-loaded damper.
Our louvers are pre-painted G60 galvanized steel. They come with 1/2-inch hardware screen installed to the inside of the louver and have a nailing flange for easy installation. They are available in 4 sizes (18x24, 24x24, 24x30, 30x30) and will be manufactured in the color to match your building.
We manufacture roof cupolas with standard louvered sides or with decorative lited sides in three sizes (2, 3, and 4 foot.) The units are constructed of galvanized prepainted steel in many color choices. Optional Premium Base, makes it easier to mount, without cutting a hole in the roof. To add that special touch, we carry a number of attractive weather vanes in stock. They are easily attached by simply removing a threaded plug at the top of the barn roof cupola and turning on the weather vane.
Plyco has been building wall vents for the confinement industry for over 40 years. They are available in top hinge and pivoted configuration. They are also available in insulated and non-insulated. They are made of an aluminum extrusion with built in nailing flange for quick installation. They also have fiberglass inserts. The standard hardware allows for opening from the inside or the wall exhaust vent but outside opening hardware is available as an option where screens may be desired.
This ridge cap ventilator product is used in conjunction with your ridge cap. It is constructed of aluminum and has a 1-inch wide perforated area running its entire length. It comes in 6-foot lengths and notched in 6 different configurations to match most steel roof patterns.
This low profile, adhesive backed, black plastic corrugated vent material is ideal when a very low profile vented ridge is desired. The material gives 13 inches of free air space per lineal foot and can be used in conjunction with your current ridge cap and closure material.